The XXVIITH International Conference Research for Furniture Industry
(17-18 September 2015)
17 September 2015 THURSDAY
09.00
10.00
Registration
10.00
10.30
Opening Ceremony
10.30
10.50
Coffee Break
10.50
12.30
Panel:
"Furniture Industry and Global Competitiveness"
Assoc. Prof. Dr. Hamza Çınar

Moderator
Ahmet Kahraman
The Head of Turkish Forestry Products Assembly
Ahmet Güleç
Head of Turkish Furniture Federation
Aykut Coşkan
TEPE Home General Director

12.30
13.30
LUNCH
HALL A HALL B HALL C
Session Chair: Assoc. Prof. Dr. Cevdet Söğütlü Session Chair: Assoc. Prof. Dr. Ergün Güntekin Session Chair: Prof. Dr. Ali Kasal
13.30
13.45
Benedikt Neyses, Dick Sandberg
Development of a wood-based modular furniture system
H. Huseyin Ciritcioğlu, Erol Burdurlu, Recep Akbulut
Selection of the most suitable edge banding machine with the financial analysis techniques
Yılmaz Kılıç, C. Gökhan Karagöz, Meliha Ulupınar Öz, İlker Usta, Bulut Akkuş, Kıvanç Yılmaz
The effect of reconstituted veneer on chip board bending strength
13.45
14.00
Deniz Demirarslan
Design principles of seating furniture in the historical process
Burçin Saltık, Yılmaz Kılıç, G. Cankız Elibol, İlker Usta
Office furniture manufacturers’ connection system preferences
Mehmet Erdal Kara, Saim Ateş
Effects of some production variables on MDF quality
14.00
14.15
Esra Gökçen Akdağ
An integrative furniture system to foster environmentally conscious behavior in children
Hamza Çınar, Nihat Döngel, Hayrettin Meriç, Musa Atar
An overview of woldwide competitiveness: A case study of the Turkish furniture industry
Cevdet Saçlı
The effect of time, edge banding type, thickness on the bending and tensile strength of melamine coated particleboard
14.15
14.30
Marina Cionca, Ioan Muscu, Biborka Bartha
1950’s design experience. Seven study cases
Emine Yüksel , Murat Kılıç
Eco-friendly approach in furniture design
Mustafa Küçüktüvek, Hakan Keskin, Taner Asci
Evaluation of some technologic properties of poppy husk (papaver somniferum linnaeus) and black pine wood (Pinus nigra var. pallasiana) based particleboards
14.30
14.45
Tülay Canbolat (Özdemir)
An analysis "approaches to nature"" in forming furniture "
Cevdet Söğütlü, Hamza Çınar, Rıza Selçuk Uluada, Murat Uzel
A case study for office furniture design in Turkey
Ahmet Tekin, Hakan Keskin
Effects of temperature and humidity on formaldehyde emission from composite furniture components
14.45
15.00
H.Hasan Efe
Furniture; design concept and trends
Özlem Özgenç, Sefa Durmaz
Evaluation of old wooden doors in the furniture industry
Günay Özbay, Ayhan Özçifçi, Erkan Sami Kökten, Hilmi Toker, Ergün Baysal
Bio-char production from pyrolysis of furniture products waste
15.00
15.30
Coffee Break
Session Chair: Assoc. Prof. Dr. Hamza Çınar Session Chair: Prof. Dr. İlker Usta Session Chair: Prof. Dr. Ayhan Özçifçi
15.30
15.45
Jerzy Smardzewski
Mechanical properties of wood-based sandwich panels with a wavy core
Oktay Okcu, Daniela Tesarova, Josef Hlavatý
Temperature of bonds between and plastic
Mehmet Budakçı, Mehmet Karamanoğlu
The restoration of wood material with bleaching
15.45
16.00
Mohammad Derikvand, Mosayeb Dalvand, Sadegh Maleki, Ghanbar Ebrahimi
Numerical analysis of semi-rigid furniture connections using FEM
Oktay Okcu, Daniela Tesarova, Tuncay Bilge
The effects of surface roughness on adhesion resistance
Hüseyin Pelit, Abdullah Sönmez, Erol Burdurlu, İlker Usta
Determining the surface hardness of some densified and heat treated woods after water-based varnishing
16.00
16.15
Adam Majewski , Jerzy Smardzewski
Models for elastic deformation of auxetic honeycomb with triangular cells
Mustafa Altunok, Tuğçe Demirezen, Murat Yılmaz
Determining of the adhesion performances of some wood glues in masives and panels
Hacı İsmail Kesik, Hasan Vurdu, Mustafa Öncel, Osman Emre Özkan, Kubulay Çağatay, Hakan Aydoğan
The effects of varnish and paint coatings on oil heat treated Turkish fir wood
16.15
16.30
Mehmet Nuri Yıldırım, Burhanettin Uysal, Ayhan Özçifçi, Hüseyin Yörür, Süleyman Özcan
Finite elements analysis (fatigue) of wooden furniture strength
Selçuk Demirci, Ali Kasal, Mehmet Acar, Tolga Kuskun
Tensile shear strengths of some tropical woods bonded with different adhesives
Onur Ülker, Erol Burdurlu
Effect of densification temperature with different cutting angles on the surface roughness of densified scots pine (Pinus sylvestris L.)
17.00
17.15
Ergün Güntekin, Tuğba Yılmaz Aydın, Peter Niemz
Some orthotropic mechanical properties of Sessile oak (Quercus petrea) as influenced by moisture content
İhsan Küreli, Sefer Doğanay, Mustafa Altunok
Investigation of the effects of lamination and densification to the mechanical and physical properties on beech wood
Memiş Akkuş, Mehmet Budakçı
Effects of color change of heat - treated some wood materials
17.15
17.30
Ersan Güray, Ali Kasal, Yusuf Z. Erdil, Tolga Kuşkun, Mehmet Acar
Determination of the minimum weight of furniture frames with subjected to required strength constraints
Ayhan Özçifçi, Günay Özbay, Erkan Sami Kökten, Çağlar Altay
Determination of dimensional stability of laminated wood material reinforced with carbon fiber (CFRP) exposed to water vapor
M. Selmani Muslu, Abdullah Sönmez
The effect of cutting direction and type of water-based varnish on sound transmission loss in oriental beech (Fagus orientalis L.) and scots pine (Pinus sylvestris L.)
19.30 GALA DINNER
18 September 2015 FRIDAY
HALL A HALL B HALL C
Session Chair: Prof. Dr. Jerzy Smardzewski Session Chair: Dr. Milan Šimek Session Chair: Prof. Dr. H.Hasan Efe
09.00
09.15
Josefin Nilsson, Jimmy Johansson
Characteristics of un-barked small-dimensioned birch for furniture and interior applications
Onur Ülker, Emine Yüksel, H. Ender Erdem
The ergonomically analysis at office chairs used by public officers
Taner Asci, Hakan Keskin, Mustafa Küçüktüvek
Impacts of rosin (C19H29COOH) to retension performance of boron compounds borax (Na2B4O710H2O) and boric acid (H3BO3)
09.15
09.30
Zigy Amélia Langaa, Xiaodong (Alice) Wangb, Andrade Fernando Egasa
Effect of joint geometry of some types of mortise-tenon on strength and stiffness of joints in school furniture
Hasan Kurban, Ali Naci Tankut, Kenan Melemez
Ergonomic and structural analysis of classroom furniture: A case study for high schools in Bartin, Turkey
Musa Atar, Hamza Çınar
Impacts of impregnation with boron compounds and varnishing on combustion properties of oriental spruce (Picea Orientalis Lipsky)
09.30
09.45
Mohammad Derikvand, Halimeh Pangh, Ghanbar Ebrahimi
Experimental shape optimization of floating-tenon connections
Murat Aydın, K. Hüseyin Koç
A study on compliance with occupational health and safety rules in yacht interior production
Cevdet Söğütlü, Ali Temiz, Nihat Döngel, H. Özgür İmirzi, Ahmet C. Yalınkılıç, Şemsettin Doruk
The effect of impregnation treatment with sodium borate solution to gloss and color changes of wood materials
09.45
10.00
Mohammad Derikvand, Ghanbar Ebrahimi
Rotational stiffness of L-shaped dowel joints
Hasan Efe, Ali Kasal, Halil Kılıç, Can Özcan
Effect of the critical ergonomics parameters on domestic chairs for comfort using the human based product development software
Hamiyet Şahin Kol, Yusuf Sefil, Sema Aysal Keskin
Effect of heat treatment on the mechanical properties, and dimensional stability of fir wood
10.00
10.15
Ali Kasal, Tolga Kuşkun, Hasan Efe, Yusuf Z. Erdil
Relationship between static front to back loading capacity of whole chair and the strength of individual joints
Özlem Bozkurt
Health risks of materials used in baby furniture
Osman Perçin, Sait Dündar Sofuoğlu, Mustafa Altunok
Effect of heat treatment on some physical and mechanical properties of laminated wood
10.15
10.30
Coffee Break
Session Chair: Prof. Dr. Ali Kasal Session Chair: Assoc. Prof. Dr. Cevdet Söğütlü Session Chair: Assoc. Prof. Dr. Hamza Çınar
10.30
10.45
Milan Šimek, Jiří Tauber, Václav Šprdlík Innovations in sitting design with a use of CNC technology Harun Diler, Hasan Efe, Ali Kasal, Yusuf Ziya Erdil, Tolga Kuşkun
Comparison of the performance of some household chairs manufactured in Turkey with allowable design loads
Musa Atar, Davut Şakacı, Hakan Keskin, Meryem Dereli, Yasemin Öztürk, Adem Kaya
Effects of compression and tensile performances of corner joint techniques to amount of deflection for plastic-based wooden materials
10.45
11.00
İlker Usta
Depictions on wood: Acceptation and internalization of wood, which is an intercultural interaction tool, as “a valuable object” (wood is beautiful and versatile material)
Sibel Yıldız, Ümit C. Yıldız, Ayşenur Yılmaz
Investigation of re-use possibilities of over-utilized wooden window frames
Musa Atar, Hakan Keskin, Meryem Dereli, Mehmet Güneş
Effects of different joint angles on the diagonal compression strength of dovetail leg-to-rail joints
11.00
11.15
Rahmi Aras, İhsan Küreli, Erhan İşler, Murat Erbüyür
Traditional Turkish houses ceilings
Hüseyin Yeşil, Mustafa Altunok, Murat Özalp
Experimental setups on sample case furniture
Hasan Özgür İmirzi, Hasan Efe, Yasin Yüce
Furniture strength properties of corner joints of wood based panel and produced with technique of biscuit (wood-plate) joints
11.15
11.30
H. Hasan Efe, Tuğba Andaç
Constructional characteristics of upholstered furniture inthe presidency museum of Ataturk mansion
Hamza Çınar, Abdurrauf Tuncer, Alirıza Arslan
A case study of wheelchair users in Turkey
Tomasz Rogoziński
Dust creation in CNC woodworking
11.30
11.45
Coffee Break
11.45
12.30
CLOSING PANEL
12.30
13.30
LUNCH
13.30
17.30
Visit to Museum

Poznań University of Life Sciences

Organization Secretary